Husqvarna DXR300 Скачать руководство пользователя страница 47 | Manualshive

Страница: 47 / 60

background image

English

– 47

TROUBLESHOOTING

Error messages

There are two types of error messages that can appear on the display:

•

Service messages - These messages do not represent any direct danger for the operator or the machine.

•

Warnings - These warn of faults or safety defects that can cause mechanical damage.

All error messages that have been acknowledged remain as small yellow red warning triangles in the field for service and can be
accessed by bringing up the service menu and selecting 'Warnings”. The messages are listed in order of priority, highest priority
first.

When a fault that has in some way restricted the machine’s functions ceases, a message appears on the display. This message
must be acknowledged for the machine to return to full functionality.

Service messages

Message on the display

Indication on the
machine

Cause

Possible action

Oil filter need to be changed

Flashes 3 times with the
work lighting.

The oil filter must be
replaced.

Replace the oil filter.

Low hydraulic oil level

Oil level is low.

Fill in more oil.

Low battery

Low battery level in
terminal.

Change battery or connect
orange cable.

Left joystick button on left joystick
activated during power up. Button has
been disabled.

No indication on machine.

Joystick activated during
terminal start up.

Check joystick value in test
menu (terminal
diagnostics). Restart
terminal.

Right joystick button on left joystick
activated during power up. Button has
been disabled.

Left joystick button on right joystick
activated during power up. Button has
been disabled.

Right joystick button on right joystick
activated during power up. Button has
been disabled.

Up/Down movement on left joystick
activated during power up. Up/Down
movement has been disabled.

Left/Right movement on left joystick
activated during power up. Left/Right
movement has been disabled.

Up/Down movement on right joystick
activated during power up. Up/Down
movement has been disabled.

Left/Right movement on right joystick
activated during power up. Left/Right
movement has been disabled.

Connection to terminal radio failed.
Please check battery level and restart
terminal.

The terminal can not
communicate with the
terminal radio

Change battery, check
cables to terminal radio.

Cable connection established between
terminal and machine but no control
modules found. Please check cable and
control modules.

The terminal can connect
to the machine but not to
PLC modules.

Check fuses to the PLC
moduels, check supply and
CAN cables to the
modules.

Radio connection established between
remote control and machine but no
control modules found. Please check
control modules and CAN connection in
machine.

The terminal can connect
to radio in the machine but
not to PLC modules.

«
...
45
46
47
48
49
...
»

Содержание DXR300





























































Отзывы:

Нет отзывов

Похожие инструкции для DXR300

Бренд: BBC Страницы: 2

Бренд: JAKA Страницы: 73

Бренд: WowWee Страницы: 16

Бренд: Totem Страницы: 28

JMHZ2-20D-X7510

Бренд: SMC Networks Страницы: 2

Бренд: 4tronix Страницы: 7

REX THE DINOBOT

Бренд: Xtrem Bots Страницы: 32

Obstacle Avoidance Smart Car Kit

Бренд: LAFVIN Страницы: 80

Бренд: Innovation First Страницы: 3

Бренд: TEACH TECH Страницы: 60

Бренд: Jigabot Страницы: 3

Бренд: SunFounder Страницы: 67

Бренд: Kettler Страницы: 15

Бренд: Kettler Страницы: 23

QN02 Family Robot

Бренд: ESCAM Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды