Husqvarna 2014 FC 450 EU Скачать руководство пользователя

Страница: 64 / 99

12 BRAKE SYSTEM

12.13

Changing the rear brake linings

Warning

Danger of accident

Brake system failure.

–

Maintenance work and repairs must be carried out professionally. (Your authorized Husqvarna workshop will be glad to help.)

Warning

Skin irritation

Brake fluid can cause skin irritation on contact.

–

Avoid contact with skin and eyes, and keep out of the reach of children.

–

Wear suitable protective clothing and goggles.

–

If brake fluid comes into contact with the eyes, flush the eyes thoroughly with water and consult a physician immediately.

Warning

Danger of accidents

Reduced braking efficiency due to old brake fluid.

–

Change the brake fluid of the front and rear brake according to the service schedule. (Your authorized Husqvarna workshop

will be glad to help.)

Warning

Environmental hazard

Hazardous substances cause environmental damage.

–

Oil, grease, filters, fuel, cleaners, brake fluid, etc., should be disposed of as stipulated in applicable regulations.

Info

Never use DOT 5 brake fluid! It is silicone-based and purple in color. Oil seals and brake lines are not designed for DOT 5 brake

fluid.

Avoid contact between brake fluid and painted parts. Brake fluid attacks paint!

Use only clean brake fluid from a sealed container.

B01904-10

–

Stand the vehicle upright.

–

Remove screw cap

with membrane

and the O-ring.

B01906-10

–

Press the brake caliper onto the brake disc by hand in order to push back the brake

piston and ensure that brake fluid does not flow out of the brake fluid reservoir,

extracting it by suction if it does.

Info

Make sure when pushing back the brake piston that you do not press the

brake caliper against the spokes.

–

Remove cotter pins

, pull out pin

, and remove the brake linings.

–

Clean the brake caliper and brake caliper support.

L00194-10

–

Check that leaf spring

in the brake caliper and sliding plate

in the brake

caliper support are seated correctly.

Info

The arrow on the leaf spring points in the rotation direction of the brake disc.

Содержание 2014 FC 450 EU




































































































Результаты поиска

Содержание 2014 FC 450 EU

Отзывы:

Похожие инструкции для 2014 FC 450 EU

Бренды по названию

Популярные бренды

Husqvarna 2014 FC 450 EU, Руководство пользователя

Результаты поиска

Содержание 2014 FC 450 EU

Отзывы:

Похожие инструкции для 2014 FC 450 EU

Бренды по названию

Популярные бренды