Husqvarna 2014 FC 450 EU, Руководство пользователя

Страница: 33 / 99

10 TUNING THE CHASSIS
31
Guideline
Rebound damping
Comfort 14 clicks
Standard 12 clicks
Sport 10 clicks
Info
Turn clockwise to increase damping; turn counterclockwise to reduce damp-
ing.
–
Mount protection caps
1
.
10.14 Handlebar position
800116-10
On the upper triple clamp, there are two holes at a distance of
A
to each other.
Hole distance A 15 mm (0.59 in)
The holes on the handlebar support are placed at a distance of B from the center.
Hole distance B 3.5 mm (0.138 in)
The handlebar can be mounted in four different positions. In this way, the handlebar can
be mounted in the position that is most comfortable for the rider.
10.15 Adjusting the handlebar position
x
B00375-10
–
Remove screws 1 . Take off the handlebar clamps. Take off the handlebar and lay it
to one side.
Info
Protect the components against damage by covering them.
Do not bend the cables and lines.
–
Remove screws
2
. Remove the handlebar supports.
–
Place the handlebar supports in the required position. Mount and tighten screws 2 .
Guideline
Screw, handlebar support M10 40 Nm
(29.5 lbf ft)
Loctite ® 243™
Info
Position the left and right handlebar supports evenly.
–
Position the handlebar.
Info
Make sure the cables and wiring are positioned correctly.
–
Position the handlebar clamps. Mount and tighten screws
1
evenly.
Guideline
Screw, handlebar clamp M8 20 Nm (14.8 lbf ft)