Husqvarna 2014 FC 450 EU, Руководство пользователя

Страница: 56 / 99

11 SERVICE WORK ON THE CHASSIS
54
B01930-10
–
Fill bleeding syringe 4 with the appropriate hydraulic fluid.
Bleed syringe (50329050000)
Brake fluid DOT 4 / DOT 5.1 (
p. 91)
–
Mount bleeding syringe
4
on bleeder screw
5
using a fitting hose piece.
–
Only loosen bleeder screw
5
on the clutch slave cylinder to the point where filling is
possible.
Info
Clean up overflowed or spilt brake fluid immediately with water.
Avoid contact between brake fluid and painted parts. Brake fluid attacks
paint!
Use only clean brake fluid from a sealed container!
C00445-10
–
Inject the liquid into the system until it escapes from openings
6
of the master
cylinder without bubbles.
–
To prevent overflow, drain fluid occasionally from the master cylinder reservoir.
–
Tighten the bleeder screw and remove the bleeding syringe with the hose.
–
Correct the fluid level of the hydraulic clutch.
Guideline
Fluid level below container rim 4 mm (0.16 in)
–
Position the cover with the membrane. Mount and tighten the screws.