Husqvarna 2014 FC 450 EU Скачать руководство пользователя

Страница: 58 / 99

12 BRAKE SYSTEM

12.4

Checking the brake fluid level of the front brake

Warning

Danger of accidents

Brake system failure.

–

If the brake fluid level drops below the specified marking or the specified value, this is an indication that the brake system is

leaking or that the brake linings are completely worn down. Check the brake system and do not continue riding. (Your autho-

rized Husqvarna workshop will be glad to help.)

Warning

Danger of accidents

Reduced braking efficiency due to old brake fluid.

–

Change the brake fluid of the front and rear brake according to the service schedule. (Your authorized Husqvarna workshop

will be glad to help.)

Preparatory work

–

Check the front brake linings. (

p. 57)

B01437-10

Main work

–

Move the brake fluid reservoir mounted on the handlebar to a horizontal position.

–

Check the brake fluid level in level viewer

» If the brake fluid level has dropped below marking

–

Add front brake fluid.

(

p. 56)

12.5

Adding front brake fluid

Warning

Danger of accidents

Brake system failure.

–

If the brake fluid level drops below the specified marking or the specified value, this is an indication that the brake system is

leaking or that the brake linings are completely worn down. Check the brake system and do not continue riding. (Your autho-

rized Husqvarna workshop will be glad to help.)

Warning

Skin irritation

Brake fluid can cause skin irritation on contact.

–

Avoid contact with skin and eyes, and keep out of the reach of children.

–

Wear suitable protective clothing and goggles.

–

If brake fluid comes into contact with the eyes, flush the eyes thoroughly with water and consult a physician immediately.

Warning

Danger of accidents

Reduced braking efficiency due to old brake fluid.

–

Change the brake fluid of the front and rear brake according to the service schedule. (Your authorized Husqvarna workshop

will be glad to help.)

Warning

Environmental hazard

Hazardous substances cause environmental damage.

–

Oil, grease, filters, fuel, cleaners, brake fluid, etc., should be disposed of as stipulated in applicable regulations.

Info

Never use DOT 5 brake fluid. It is silicone-based and purple in color. Oil seals and brake lines are not designed for DOT 5 brake

fluid.

Avoid contact between brake fluid and painted parts. Brake fluid attacks paint!

Use only clean brake fluid from a sealed container.

Preparatory work

–

Check the front brake linings. (

p. 57)

Содержание 2014 FC 450 EU




































































































Результаты поиска

Содержание 2014 FC 450 EU

Отзывы:

Похожие инструкции для 2014 FC 450 EU

Бренды по названию

Популярные бренды

Husqvarna 2014 FC 450 EU, Руководство пользователя

Результаты поиска

Содержание 2014 FC 450 EU

Отзывы:

Похожие инструкции для 2014 FC 450 EU

Бренды по названию

Популярные бренды