Husqvarna 2014 FC 450 EU Скачать руководство пользователя | Manualshive

Страница: 7 / 99

background image

2

SAFETY ADVICE

5

2.1

Use definition - intended use

Husqvarna sport motorcycles are designed and built to withstand the normal stresses and strains of competitive use. The motorcycles

comply with currently valid regulations and categories of the top international motorsport organizations.

Info

The motorcycle may only be used in closed off areas remote from public road traffic.

2.2

Safety advice

A number of safety instructions need to be followed to operate the vehicle safely. Therefore, read this manual carefully. The safety

instructions are highlighted in the text and are referred to at the relevant passages.

Info

The vehicle has various information and warning labels at prominent locations. Do not remove information/warning labels. If they

are missing, you or others may not recognize dangers and may therefore be injured.

2.3

Degrees of risk and symbols

Danger

Identifies a danger that will immediately and invariably lead to fatal or serious permanent injury if the appropriate measures are not

taken.

Warning

Identifies a danger that is likely to lead to fatal or serious injury if the appropriate measures are not taken.

Caution

Identifies a danger that may lead to minor injuries if the appropriate measures are not taken.

Note

Identifies a danger that will lead to considerable machine and material damage if the appropriate measures are not taken.

Warning

Identifies a danger that will lead to environmental damage if the appropriate measures are not taken.

2.4

Tampering warning

Tampering with the noise control system is prohibited. Federal law prohibits the following acts or the causing thereof:

1 The removal or rendering inoperative by any person other than for purposes of maintenance, repair, or replacement, of any device or

element of design incorporated into any new vehicle for the purpose of noise control prior to its sale or delivery to the ultimate pur-

chaser or while it is in use, or

2 the use of the vehicle after such device or element of design has been removed or rendered inoperative by any person.

Among those acts presumed to constitute tampering are the acts listed below:

1 Removal or puncturing of the main silencer, baffles, header pipes or any other components which conduct exhaust gases.
2 Removal or puncturing of parts of the intake system.
3 Lack of proper maintenance.
4 Replacing moving part of the vehicle, or parts of the exhaust or intake system, with parts other than those specified by the manufac-

turer.

2.5

Safe operation

Danger

Danger of accidents

Danger arising from the rider's judgement being impaired.

–

Do not operate the vehicle while under the influence of alcohol, drugs and certain medications or physically or mentally

impaired.

Danger

Danger of poisoning

Exhaust gases are toxic and inhaling them may result in unconsciousness and/or death.

–

When running the engine, always make sure there is sufficient ventilation, and do not start or run the engine in an enclosed

space without an effective exhaust extraction system.

«
...
5
6
7
8
9
...
»

Содержание 2014 FC 450 EU




































































































Отзывы:

Нет отзывов

Похожие инструкции для 2014 FC 450 EU

Бренд: Maico Страницы: 13

Бренд: DAELIM Страницы: 93

640 LC4 ENDURO 2006

Бренд: KTM Страницы: 60

Бренд: X-lite Страницы: 96

Easyrack 661658 01 01

Бренд: hepco & becker Страницы: 4

WOLVERINE X4 2021

Бренд: Yamaha Страницы: 192

Бренд: Yamaha Страницы: 224

Бренд: Yamaha Страницы: 343

Бренд: Yamaha Страницы: 404

Бренд: Yamaha Страницы: 432

Бренд: Yamaha Страницы: 404

Бренд: Yamaha Страницы: 694

Бренд: Yamaha Страницы: 864

Бренд: Yamaha Страницы: 912

Бренд: Yamaha Страницы: 864

Бренд: Yamaha Страницы: 110

Бренд: Yamaha Страницы: 119

Бренд: Yamaha Страницы: 124

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды