Husqvarna Viking Viking Topaz 40, Руководство пользователя

Страница: 72 / 104

6:6
6. Clear sufficient space around the machine to accommodate
movement of the embroidery arm and the hoop. Hold the
needle thread and touch the Start/Stop button or the foot
control. The machine starts embroidering.
Note: This machine features Automatic Jump Stitch Trim. When
activated the machine trims the top jump stitch threads and pulls the
thread ends to the underside of the fabric. The default setting is on.
To turn it off, go to the SET Menu, Embroidery Settings and deselect
Automatic Jump Stitch Trim. Read more about Automatic Jump Stitch
Trim in chapter 3.
If Automatic Jump Stitch Trim is not activated the
machine will stop after stitching a few stitches. A pop-
up message will appear on the screen asking you to cut
the thread end. Cut the thread and press Start/Stop to
continue embroidering.
7. When the first color is completed, your machine cuts the
top thread and stops. A pop-up message appears asking
you to change thread color. Re-thread with the next color
and continue embroidering by pressing Start/Stop. Hold
the thread end. The machine will trim the top thread end
and you can pull it loose.
At the end of each color block, the thread is tied off and
the needle thread is cut.
8. When the embroidery is completed, your machine cuts the
top thread and bobbin thread and stops. The needle and
presser foot raise automatically for easy removal of the
hoop.
A pop-up message and sound informs you that your
embroidery is finished. Touch OK to keep the design
loaded and stay in Embroidery Stitch-Out.