Husqvarna Viking Viking Topaz 40, Руководство пользователя

Страница: 69 / 104

6:3
B
A
E
mbroidEry
S
Et
U
p
CONNECT THE EMBROIDERY UNIT
1. Slide the sewing accessory box off.
2. There is a socket at the back of the machine (A). Slide the
embroidery unit onto the free arm of the machine until
it plugs firmly into the socket. If needed use the level
adjusting feet so that the machine and embroidery unit are
even. If the machine is turned off, turn it on.
3. A pop-up message tells you to clear the embroidery arm
and remove the hoop for positioning. Touch OK or cancel
depending on if you want to calibrate. The machine will
calibrate and the embroidery arm will move to the park
position.
Note: Do NOT calibrate the machine with the embroidery hoop attached
as this can damage the needle, presser foot, hoop and/or the embroidery
unit. Be sure to clear all materials from around the machine before
calibrating so that the embroidery arm does not bump into anything while
calibrating.
REMOVE THE EMBROIDERY UNIT
1. To store the embroidery unit, move the embroidery arm
to Park Position by selecting Park Position on the screen in
Embroidery Stitch-Out.
2. Press the button at the left, underneath the embroidery
unit (B) and slide the unit to the left to remove it.
Note: If you want to sew, remove the embroidery unit.
ATTACH THE EMBROIDERY FOOT R
When embroidering, use the Embroidery foot R. See page
2:10 for instructions on how to change presser foot.
Note: You can also use the optional Sensor Q-foot when embroidering
(part number 413192045). Activate the ”Sensor Q foot” function in
SET Menu, Embroidery settings, see page 3:11.