Husqvarna Viking Viking Topaz 40, Руководство пользователя

Страница: 41 / 104

3:11 S
ettingS
& F
unction buttonS
EMBROIDERY SETTINGS
Selective Thread Cutter Auto for embroidery
The Selective Thread Cutter Auto in the Embroidery Settings
is activated by default. The threads are cut automatically and
the presser foot raises at color changes or when an embroidery
is finished. When deselected, no Selective Thread Cutter Auto
will be performed.
Automatic Jump Stitch Trim
This machine features Automatic Jump Stitch Trim. This
function saves you time trimming after the embroidery is
completed. As you embroider, the machine will trim the top
jump stitch thread and pull the thread end to the underside of
the fabric.
Note: The machine will also cut the thread after you have changed to a
new color. Hold the thread end when you start embroidering again, so
that you can easily remove the thread end when cut.
Designs marked with this symbol are programmed for Automatic Jump
Stitch Trim. Jump stitch trim commands can be added to any
design using the downloadable software.
See chapter 2.
Note: If the back of your embroidery will be visible, turn off the
Automatic Jump Stitch Trim and cut the threads manually.
Hoop Selection
Touch the Hoop Selection icon and select the hoops you own.
When you first load a design, the machine will select the most
suitable hoop among the ones you have entered in the Hoop
Selection.
Presser Foot Height embroidery
Adjust the height of the presser foot in Embroidery Stitch-
Out mode when using your presser foot R.
Some embroideries may build up under the presser foot. If
there is not enough space between the presser foot and the
embroidery, the top thread will form loops on the underside
of the embroidery. Increase the presser foot height in small
steps until the embroidery moves freely under the presser
foot.
Sensor Q-foot for embroidery
When embroidering, activate the ”Sensor Q foot” function
when using the optional Sensor Q foot (part number 4131920-
45, available at your authorized HUSQVARNA VIKING
®
retailer). The Sensor Q-foot continously measures the fabric
thickness and adjusts the presser foot height.