Husqvarna Viking Viking Topaz 40, Руководство пользователя

Страница: 58 / 104

4:16
1. 2. 3. 4.
MANUAL BARTACK
Decide the length of your bartack manually with stitch A:21.
sew
:
Place fabric under the presser foot. Touch Sensor Foot Down
and Pivot twice and adjust the fabric if necessary. Step on the
foot control, the Sensor Foot lowers automatically and stitch.
1. Your machine will sew a straight stitch until you touch
Reverse .
2. Your machine will then sew in reverse until you touch
reverse again.
3. Your machine will then sew a Zig Zag, covering the
straight stitches.
4. Touch reverse to automatically tie off and cut the threads.
SEWING ON BUTTONS
Sew buttons, snaps, hooks and eyes quickly with your sewing
machine.
Select the fabric you are using and the stitch for sewing on
buttons A:32.
1. Snap off the presser foot and lower the feed teeth.
2. Place the fabric, multipurpose tool and button under the
ankle with the holes in the button lined up with the swing
of the needle. Check the swing of the needle by pressing
the mirror side to side button to be sure the needle will
not hit the button. Bring the needle down into the holes
of the button with the handwheel to verify.
Tip: When using the multipurpose tool, the button is stitched to the fabric
leaving a shank. Place the thin end of the multipurpose tool under the
button when sewing on light fabrics. Use the thick end for heavier fabrics.
Hold in place on the fabric with transparent tape.
If stitching without the multipurpose tool the button is stitched to the
fabric without distance.
Note: The recommended width of 3.0 is set for most buttons. If you sew
a tiny button or a very large coat button, decrease or increase the stitch
width until the swing of the needle sews in the holes of the button.
3. Set the number of stitches to sew on the button by
pressing the up and down arrows. Six to eight stitches is
standard.
4. Press the foot control. The sewing machine will sew the
number of stitches set on the screen and then tie off and
stop.
5. Raise feed teeth when button sewing is completed.