Warning Messages
Bobbin Winding Position
When the bobbin spindle is pushed to the right, the letters
“SP” appear on the LED display. If you press any button, a
beep will inform you to push the bobbin winder spindle to
the left, sewing position.
Note: You cannot sew in bobbin winding position.
Buttonhole Lever Not Lowered and Pressed
If the buttonhole lever is not lowered and pressed when
sewing buttonholes, the letters “E1” appear on the LED
display. See Sewing Buttonholes, page 34.
Raise Needle
If the needle is lowered when turning on the machine, the
letters “UP” appear on the LED display. Turn the handwheel
clockwise to raise the needle. When the needle is fully raised,
the machine will calibrate and you can start sewing.
Main Motor Overload
Your sewing machine can get overloaded when sewing on
heavy fabrics, if the thread gets twisted or jammed, or the
handwheel axle cannot move. The letters “E2” appear on the
LED display. Please refer to the troubleshooting section to
find a recommended solution. When the problem has been
solved, the machine will continue to sew.
Note: If the problem is still not solved, please contact your local
authorized HUSQVARNA VIKING® retailer.
2 Preparations
25
