3 Sewing
When the machine is turned on, straight stitch 1 is selected
by default.
Selecting a Stitch
Stitches 0-9 are illustrated on the stitch selection buttons. If
you press any of the stitch selection buttons once, you select
the stitch illustrated on that button.
Stitches numbered from 10 and up are illustrated with stitch
numbers inside the lid. By pressing two digits in quick
succession you will be able to select a stitch from 10 and up.
If the stitch number does not exist you will hear a beep and
the previous stitch selection will be kept.
The number of the selected stitch is shown on the LED
display.
Stitch Settings
Your machine automatically sets the best settings for the
selected stitch. You can make your own adjustments on the
selected stitch.
The setting changes only affect the selected stitch. Your
changed settings will be reset to default when selecting
another stitch. The changed settings are not saved when
turning your machine off.
Note: When trying to exceed minimum or maximum settings a beep
will be heard.
Stitch Length/Stitch Density
Stitch length –/default stitch length/stitch
To see current stitch length, press “–” or “+” once next to
the stitch length icon. The stitch length value will be
indicated on the display. After a few seconds, the display will
return to show the stitch number.
To change the stitch length, press “–” or “+” button in quick
succession while stitch length is indicated on the display. The
LED next to the stitch length icon lights up, indicating that
the set value is not the default value.
Stitch density –/default stitch density/stitch d
For satin stitches (number 27 and 58–66) the stitch length
buttons are used to set the stitch density.
To see current stitch density, press “–” or “+” once next to
the stitch length icon. The stitch density value will be
indicated on the display. After a few seconds, the display will
return to show the stitch number.
To change the stitch density, press “–” or “+” button in
quick succession while stitch length is indicated on the
display. The LED next to the stitch length icon lights up,
indicating that the set value is not the default value.
26
3 Sewing
