Function Buttons
2
3
4
5
6
1
8
7
10
9
11
1. Needle stop up/down with
indicator
2. STOP function
3. FIX function
4. Speed + and -
5. Start/stop
6. Reverse
7. Stitch selection buttons
8. Stitch length
9. Stitch width/needle position
10. Mirror side to side
11. View presser foot recommendation
Needle Stop Up/Down With Indicator
Press the needle stop up/down to move the needle up or down. The setting of the needle stop position is changed at the same
time. The LED indicators next to the button show the selected stop position. The upper indicator is lit when needle stop up is
selected and the lower when needle stop down is selected.
You can also tap the foot control to raise or lower the needle.
STOP Function
STOP is used to conclude a stitch or to sew just one unit of the stitch. Your sewing machine ties off the thread and stops
automatically when one stitch unit has been completed. The LED next to the button is lit when STOP is activated. To cancel;
select STOP again or select a new stitch. The STOP function is cancelled when the stitch is completed. Press the button again if
you wish to activate it again.
STOP is also used to repeat the darning or bartack stitch with the same size.
FIX Function
FIX is used to tie off a stitch. FIX is automatically activated when you use STOP while you are sewing. At the beginning, your
machine sews a few tie-off stitches and continues with the selected stitch. Press FIX while sewing and your machine sews a few
tie-off stitches and stops automatically. The LED next to the button is lit when FIX is active. Press the FIX button to turn the
function off.
Speed + and –
All stitches in your machine have a pre-set, recommended sewing speed. Press speed + or speed – to increase or decrease the
sewing speed. There are five speed levels. Press speed + or speed – before starting to sew and the display will show the current
setting as “S1” to “S5”. Pressing speed + or speed – while sewing will change the speed but the setting will not be shown on the
display. You cannot select a higher speed than the default max speed for the selected stitch. When trying to exceed minimum or
maximum speed, you will hear a beep.
2 Preparations
23
