Husqvarna Viking Huskylock 936, Руководство пользователя

Страница: 8 / 78

—4—
2
1
2
1
ON
OFF
Accessory box
Lift the accessory box slightly
➀
and slide it in
the direction of the arrow
➁
.
The accessory box consists of two parts. It
holds the foot control and other accessories. To
slide the box back on, reverse the steps from
above.
Connection
Note: Turn the main power switch off.
Among the accessories you will fi nd the foot
control cord and the main cord.
1. Place the foot control on its narrow side. Fit
the plug into the socket inside the foot control
compartment.
2. Push it fi rmly to make sure it is properly con-
nected. This operation only necessary the
very fi rst time you are going to use the
machine.
3. To correctly turn away the cord, place it into
the slot, see picture.
Note: Before plugging in, check to ensure that
the foot control is of “FR-4”.
On the back of the machine, there is informa-
tion about the voltage. Before plugging in your
machine, make sure that these values corre-
spond to power supply. The specifi cations vary
from country to country.
Connect foot control and power cord
➀ ➁
.
When pressing the main switch, both machine
and sewing light are turned on.
• Always turn off and unplug the machine
when not in use.
• When the power switch is turned off, the ma-
chine will not start even if you press the foot
control.
• Never leave anything on the foot control.