Husqvarna Viking Huskylock 936, Руководство пользователя

Страница: 41 / 78

4-8. Five thread over lock stitch and Double
chain stitch
Double chain stitch looper threading (E)
1. Raise the presser foot.
2. Open front cover.
3. Pull thread from spool through guide
➀
of the
thread stand and then through guide
➁
.
Note : Make sure the thread snaps into the slot
of guide
➁
, and then thread through
➂
to
➅
.
4. Turn the handwheel toward you and position
the double chain stitch looper to the far right.
5. When you push the looper threading knob in
the direction of the knob arrow as shown, the
double chain stitch looper moves to the right,
and you can pass thread into the thread hole
at the end of the looper more easily.
6. Then thread through guides
➆
to
➉
.
Note : Make sure the thread snaps into the slot
of guide
➇
.
7. Pull out the thread leaving about 10 cm.
8. When you start stitching after threading, the
knob returns to the original position automati-
cally.
—37—
Thread guide E
Note : When using decorative thread by Five
thread overlock stitch and Double chain
stitch as illustrated.
Insert Thread guide E from the back to-
ward the front as illustrated, then thread
a decorative thread into Thread guide E.
When carrying the sewing machine, take off
Thread guide E from the machine.
1
2
5 6
7
8
9
10
4
3
C D A B
E
7
8
9
10