Husqvarna Viking Huskylock 936 Скачать руководство пользователя

Страница: 27 / 78

Model 936 features automatic Stitch length and Differential feed. You can override the automatic

settings as follows:

3-9. Stitch length

Normal stitch length is 2.5 mm. You may change the stitch length between 0.8 (for rolled edge) and

5 mm, using the Sewing Advisor’s manual function.

Change the stitch length as follows:

1. Press cursor button until the setting number for the stitch length blinks.

2. Press plus or minus button to select the desired length number.

3. Start to sew. The stitch length is adjusted automatically to the number.

4. If you want to store this setting, you can use the memory function.

See “2-5. Manual Mode (page 12)”.

3-10. Differential feed

Differential feed helps you to sew perfect seams on all kinds of fabric from light woven to heavy

knits.

This

Huskylock

has two feed teeth. The front teeth (for differential feed) can be adjusted to feed

more or less in proportion to the rear.

The ratio can be set between 0.5 and 2.5.

For light weight fabrics, set closer to 0.5. The front teeth move slower to hold fabric taut. For heavy

weight one, set closer to 2.5. The front feed teeth move faster to prevent distortion and stretching of

fabric.

The differential feed also helps to gather woven fabrics.

For maximum gathers, set to 2.5 and increase stitch length.

Change the differential feed as follows:

1. Press cursor button until the setting number for the differential feed blinks.

2. Press plus or minus button until the number becomes to what you want to change.

3. Start to sew. The differential feed is adjusted automatically to the number value.

4. If you want to store this setting, you can use the memory function.

See “2-5. Manual Mode (page 12)”.

Note

: First sew a few test stitches on a piece of fabric you are going to use, referring the chart

below.

Note

: The differential feed ratio and the stitch length are related to each other. Their minimum and

maximum values may be limited by their combinations and selected stitch patterns.

—23—

Содержание Huskylock 936














































































Результаты поиска

Содержание Huskylock 936

Отзывы:

Похожие инструкции для Huskylock 936

Бренды по названию

Популярные бренды

Husqvarna Viking Huskylock 936, Руководство пользователя

Результаты поиска

Содержание Huskylock 936

Отзывы:

Похожие инструкции для Huskylock 936

Бренды по названию

Популярные бренды