Husqvarna Viking Huskylock 936, Руководство пользователя, Страница: 44 / 78

—40—
3
2
1
4-9. Cover stitch
Set up for Cover stitch and Chainstitch
When sewing cover stitches or double chain
stitches, change the following parts:
1. Cutter cover ( C )
2. Needle plate ( C )
3. Needle (SCHMETZ #90)
4. Presser foot ( C )
Change the parts in the following order.
Cut and remove each thread before beginning
to change the parts:
1. To position the upper looper:
1) Tap the foot controller once to stop the
needle in the lower stop position.
2) Open the front cover to reveal select lever.
3) To ensure safety, turn off the power switch.
4) While pushing down the select lever, move
it from “S” to “C”.
5) Turn the handwheel toward you by hand
to stop the needle bar in the upper stop
position.
2. To remove the standard cutter cover, slide
cutter cover (S) to the left and remove.
3. Remove the fl atbed cover and free arm cover
and lower the cutter. (Refer to Page 8)
Front cover
OFF