Huskie Tools HH100, Руководство по обслуживанию

Страница: 18 / 64

18
OIL LEAKAGE INSPECTION
Check for oil leakage at the points shown in Table 5. It is not unusual to have a small
amount of oil leakage along the tool or cylinder, (refer to Figure 10, Page 18)
Table 5. Diagnosis of Oil Leakage
LEAK LOCATION POSSIBLE CAUSE REMEDY
Between front cap
and tool (E)
Damaged or worn
U-packing
Replace seal kit
Between cylinder and
nipple (F)
Loose nipple or damaged
O-ring or nipple
Tighten or replace nipple,
and / or O-ring
Between cylinder and
back cap (G)
Damaged U-packing or
main
Valve outer sleeve O-ring,
or
Back cap O-ring
Replace seal kit.
Plug ports (H) Plugs loosen
Remove plugs and reinstall
with sealant
Figure 10.
G
F H
E