Husar Winch BST 45000 Lbs, Инструкции по сборке и эксплуатации

Страница: 10 / 28

8
Caution:
Hydraulic system needs a relief valve to make sure the system is safe; If there is not
relief valve in the system; it would be serious danger and the system can
’t operation. If
your winch drived by an existing hydraulic power system, the relief valve is also
existing.
Battery cables should not be drawn taut leave slack for some cable movement.
If your application is supplied with an added cooler, Please refer to illustration.
Check fluid level. Replace lost fluid to system. System will need to be purged. Start
engine. Power winch cable in 5 feet. Shut engine off. Check fluid level. Add fluid until
full. Start engine. Power winch cable out 5 feet. Shut engine off. Check fluid level. Add
fluid until full if necessary. Start engine. Power wrings cable into desired position. Turn
vehicle wheels from lock to lock position 5 times. This will aid in bleeding out any air
the may have got into the system.
If the hand control unit is working backwards, simply exchange the brown and white
wire connectors in valve.
Test Winch for proper operation. Refer to the Operation section, below.