Version January 2019
18
EN
HÜRNER WeldControl 2.0 630 User’s Manual
H Ü R N E R S c h w e i s s t e c h n i k G m b H
Nieder-Ohmener Str. 26
35325 Mücke, Germany
4.3.3 Possibility to Change Welding Parameters
0R?PBNRBKQÐ QLÐ PBQQFKDÐ QEBÐ AO>DÐ MOBPPROB Ð !FPMI>VÐ Ð PELTPÐ LKÐ QEBÐ
P@OBBK ÐMOLSFABAÐQE>QÐJ>KR>IÐA>Q>ÐFKMRQÐFPÐBK>?IBAÐFKÐQEBÐ/BMLOQFKDÐ
sub-menu of the Configuration Menu.
&KÐ ?LQEÐ P@OBBKPÐ BK>?IFKDÐ J>KR>IÐ FKMRQÐ LCÐ TBIAFKDÐ M>O>JBQBOPÐ !FP
-
MI>VPÐÐ>KAÐ ÐQEBÐ
Õ
and
Ö
cursor keys allow moving on from digit to
digit and from value to value. The selected digit of a parameter value
is changed using the
×
and
Ø
. The START/SET key serves to confirm
QEBÐFKMRQPÐVÐMOBPPFKDÐQEBÐ01/10"1ÐHBV ÐVLRÐ>IPLÐJ>HBÐQEBÐ@LKQOLIÐ
unit go on to the next screen.
Info
The parameters set manually are kept in memory when the
machine is turned off. Only the pressure values are computed
individually for every welding process. If the pipe parameters
@E>KDB Ð
all
parameters have to be set once again. The ma-
chine recognizes the change of pipe parameters and brings
the operator directly to the menu for changing them.
4.3.4 Setting the Joining Pressure and Starting the Bead Build-up Stage
CQBOÐ?RQQÐC>@FKDÐ>KAÐMFMBÐ>IFDKJBKQÐ@EB@H ÐQEBÐTBIAFKDÐMOL@BPPÐMOLMBOÐ
PQ>OQPÐ?VÐPBQQFKDÐQEBÐGLFKFKDÐMOBPPROBÐFB ÐQEBÐJ>UFJRJÐMOBPPROBÐQE>QÐ
TFIIÐ ?BÐ OB>@EBAÐ AROFKDÐ QEBÐ MOL@BPP Ð FKÐ QEBÐ ?B>AÐ ?RFIARMÐ PQ>DBÐ >KAÐ
at the end of the joining stage). This is done by pressing the carriage
close-in pushbutton and setting the maximum pressure regulator to
the level to be kept during bead build-up and joining/cooling. The
>@QR>IÐMOBPPROBÐPELTPÐPBBÐ!FPMI>VÐÐ>KAÐÐQEBÐ@LKQOLIÐPLCQT>OBÐJLSBPÐ
on to the next step as soon as the pressure is within tolerance.
The display also shows the nominal joining pressure applicable to this
TBIAFKDÐCQBOÐPBQQFKDÐQEBÐGLFKFKDÐMOBPPROB ÐJLSBÐ>M>OQÐQEBÐ@>OOF>DBÐ
of the machine.
Info
The so-called automode is a tool for monitoring the duration
of the bead build-up stage and moving on automatically from
the bead build-up to the heating stage by decreasing the
>MMIFBAÐMOBPPROBÐ%LTBSBO ÐQEFPÐOBNRFOBPÐQE>QÐQEBÐ>RQLJLABÐ
T>PÐBK>?IBAÐFKÐQEBÐ LKCFDRO>QFLKÐ*BKRÐ1EBK ÐTFQEÐBK>?IBAÐ
>RQLJLAB Ð!FPMI>VÐÐFPÐPELTKÐ1EBK ÐQLÐRPBÐQE>QÐ?B>AÐ?RFIA
RMÐ QFJBÐ P>SBAÐ >QÐ QEBÐ I>PQÐ TBIAFKDÐ LMBO>QFLK Ð MOBPPÐ 01/1
SET. Pressing STOP/RESET will cancel the automode for bead
?RFIARMÐ &CÐ QEBÐ ?B>AÐ ?RFIARMÐ FPÐ >RQLJLABJ>K>DBA Ð QEBÐ
?RFIARMÐQFJBÐFPÐAFPMI>VBAÐ>PÐ>Ð@LRKQALTK Ð>KAÐCOLJÐÐPB@Ð
MOFLOÐQLÐAB@OB>PFKDÐQEBÐMOBPPROB ÐQEBÐ>RAF?IBÐPFDK>IÐ@>KÐ?BÐ
heard.
QÐ QEBÐ PQ>OQÐ LCÐ QEBÐ ?B>AÐ ?RFIARMÐ PQ>DB Ð MI>@BÐ QEBÐ EB>QFKDÐ BIBJBKQÐ
between the pipe butts. The display tells you so. If the heating ele-
JBKQÐFPÐKLQÐPRCCF@FBKQIVÐELQÐ>QÐQEFPÐMLFKQ Ð>KÐFKCLOJ>QFLKÐJBPP>DBÐLKÐ
the screen asks you to wait a little longer.
Then close in the movable carriage by pressing the carriage close-in
MRPE?RQQLKÐ>KAÐT>FQÐCLOÐQEBÐTBIAÐ?B>AÐQLÐOB>@EÐQEBÐOBNRFOBAÐEBFDEQÐLOÐ
TFAQE ÐABMBKAFKDÐLKÐQEBÐRPBAÐTBIAFKDÐPQ>KA>OAÐ,?PBOSFKDÐQEBÐ?B>AÐ
FPÐ>IPLÐEFDEIVÐOB@LJJBKABAÐFKÐQEBÐ>RQLJLAB ÐBSBKÐQELRDEÐQEBÐ?B>AÐ
height is not indicated on the screen during an automode-managed
bead build-up stage.
4.3.5 Heating Stage
CQBOÐQEBÐ?B>AÐ?RFIARMÐPQ>DBÐ
st
LED in the welding diagram on the
@LKQOLIÐRKFQÐT>PÐ@LJMIBQBA ÐMOBPPROBÐJRPQÐ?BÐAB@OB>PBAÐ
nd
LED in
Put in heat. plate
222°C NOM. 16.5bar
221°C ACT. 0.5bar
Bead Height :2.0mm
Bead Build Time:68 s
230°C NOM. 16.5bar
229°C ACT. 12.5bar
Display 24
Display 25
**** AUTOMODE ****
Use last bead
build-up time?
RESET SET
Display 23
Buildup pr.:030.5bar
Heatsoakpr.:010.5bar
Heatsoaking:0120 s
Change-over:0005 s
Display 20
Cool. time :900 s
Press. ramp:010 s
Plate temp.:223 °C
Display 21
Set Joining Pressure
230°C NOM. 16.5bar
229°C ACT. 3.5bar
Display 22
Содержание WeldControl 2.0 630
Страница 2: ......
