HURNER WeldControl 2.0 630, Руководство пользователя

Страница: 38 / 79

Version January 2019 14
EN
HÜRNER WeldControl 2.0 630 User’s Manual
H Ü R N E R S c h w e i s s t e c h n i k G m b H
Nieder-Ohmener Str. 26
35325 Mücke, Germany
Enter Welder Code
++++++++++++++++++++
++++++++++
be heard. Turn the buzzer volume up or down to the desired value
using the
Õ
Ð
Ö
Ð>OOLTÐHBVPÐCOLJÐÐQLÐÐ>KAÐ@LKCFOJÐVLROÐPBQQFKDÐ
by pressing the START/SET key.
4.1.6 Understanding the “Recording” Sub-menu
“Welder Code on” means that the welder identification code has to
be
ÐBKQBOBAÐ>PÐPBQÐTFQEÐe4BIABOÐ LABÐ,MQFLKP sÐeLCC sÐQE>QÐQEFPÐ
is impossible.
e LJJRJ?BOÐLKsÐJB>KPÐQE>QÐQEBÐ@LJJFPPFLKÐKRJ?BOÐGL?Ð
number) will have to be entered or confirmed before every new
TBIAFKD ÐeLCCsÐQE>QÐQEBÐRPBOÐFPÐ
not prompted to enter it.
“Joint Number on” means that the unit assigns an automatically in-
cremented joint number to every welding operation belonging
QLÐ>Ð@LJJFPPFLKÐ>IOB>AVÐHKLTK Ð>KAÐAFPMI>VPÐQEFPÐKRJ?BOÐLKÐQEBÐ
P@OBBKÐKBUQÐQLÐQEBÐOBMLOQÐKRJ?BO ÐeLCCsÐQE>QÐ
no joint numbers
will be assigned at all.
“Additional Data on” means that the additional data will have to be
BKQBOBAÐLOÐ@LKCFOJBAÐ?BCLOBÐBSBOVÐKBTÐTBIAFKD ÐeLCCsÐQE>QÐQEBÐ
user is not prompted to enter them.
e#FQQFKDÐ LABÐLKsÐJB>KPÐQE>QÐQEBÐPB@LKA ÐPL@>IIBAÐQO>@B>?FIFQVÐ@LABÐ
of the fitting that is going to be worked has to be entered before
BSBOVÐTBIAFKD ÐeLCC sÐQE>QÐQEFPÐFPÐ
not possible.
e-FMBÐ LABPÐLKsÐJB>KPÐQE>QÐQEBÐ@LABPÐLCÐ?LQEÐMFMBP@LJMLKBKQPÐ&0,
compliant welding and treaceability codes) have to be entered
?BCLOBÐBSBOVÐTBIAFKD ÐeLCC sÐQE>QÐQEFPÐFPÐ
not possible.
“Pipe Length on” means that the length of both pipes/components
has to
Ð ?BÐ BKQBOBAÐ ?BCLOBÐ BSBOVÐ TBIAFKD Ð eLCC sÐ QE>QÐ QEFPÐ FPÐ
not
possible.
“Weather Conditions on” means that the weather has to be selected
FKÐ>ÐIFPQÐ?BCLOBÐBSBOVÐTBIAFKD ÐeLCC sÐQE>QÐQEFPÐFPÐ
not possible.
“Installing Company on” means that the company that performs the
installation work has to
Ð?BÐBKQBOBAÐ?BCLOBÐBSBOVÐTBIAFKD ÐeLCC sÐ
that this is not possible.
e-OFKQÐ1>DPÐÐkÐ*ÐkÐsÐJB>KPÐQE>QÐ?VÐMOBPPFKDÐQEBÐ*"+2ÐHBV ÐQEBÐRPBOÐ
@>KÐ>@@BPPÐ>ÐPR?JBKRÐCLOÐPQ>OQFKDÐQLÐMOFKQÐ>ÐI>?BIPÐTFQEÐOBCBO
-
BK@BÐQLÐ>ÐDFSBKÐTBIAFKDÐLMBO>QFLK ÐTFQEÐQEBÐLMQFLK>IÐI>?BIÐQ>DÐ
printer.
eKDIBÐÐkÐ*ÐkÐsÐJB>KPÐQE>QÐ?VÐMOBPPFKDÐQEBÐ*"+2ÐHBV ÐQEBÐRPBOÐ@>KÐ
>@@BPPÐ>ÐPR?JBKRÐCLOÐBKQBOFKDÐQEBÐ>KDIB ÐFKÐABDOBBP Ð?BQTBBKÐ
the two components that are going to be welded.
Info
All data that are available in the chip of a transponder card
can be entered by placing the card in front of the card reader.
&CÐQEBVÐ>OBÐBK@LABAÐFKÐ>Ð?>OÐ@LAB ÐQEBVÐ@>KÐ?BÐOB>AÐRPFKDÐQEBÐ
handheld scanner.
Ð $MSDQHMFÐ/QDENQL@SSDCÐ@MCÐ4RDQCDÆMDCÐ3Q@BD@AHKHSXÐ#@S@
4EBKÐQEBÐPVPQBJÐFPÐRPBAÐFKÐQEBÐ4BIA LKQOLIÐJLAB Ð>IIÐQO>@B>?FIFQVÐA>Q>Ð
BK>?IBAÐ FKÐ QEBÐ @LKCFDRO>QFLKÐ JBKRÐ >QÐ e/B@LOAFKDsÐ PBBÐ 0B@QÐ Ð
have to be entered before the welding process. The welding unit
prompts the user to enter them before the welding process proper.
!BMBKAFKDÐLKÐTE>QÐA>Q>ÐFPÐBKQBOBA ÐBFQEBOÐFQPÐOBMB>QBAÐFKMRQÐFPÐJ>K
-
A>QLOVÐBÐD ÐQEBÐTBIABOÐ&!Ð@LABÐPBBÐ0B@QÐÐLOÐMOBSFLRPIVÐBKQBOBAÐ
data can be changed and confirmed or confirmed without changes
BÐDÐQEBÐ@LJJFPPFLKÐKRJ?BOÐPBBÐ0B@QÐ
4.2.1 Entering the Welder ID Code
When the welding is started by pressing the START/SET key while Dis-
MI>VÐÐFPÐPELTFKD ÐCFOPQÐQEBÐFKMRQÐLCÐQEBÐTBIABOÐFABKQFCF@>QFLKÐ@LABÐFPÐ
OBNRBPQBA ÐFCÐFQÐFPÐBK>?IBAÐFKÐQEBÐ LKCFDRO>QFLKÐ*BKRÐPBBÐ!FPMI>VÐÐ
Display 11
** CONFIGURATION **
>Welder Code On
Commission No. On
Joint No. Off
Display 10