HURNER HWT 160-M, Руководство пользователя

Страница: 20 / 32

Version August 2010
10
EN
HWT 160–M User’s Manual
H Ü R N E R S c h w e i s s t e c h n i k G m b H
Nieder-Ohmener Str. 26
35325 Mücke, Germany
Issue Correction
The facing process does not
yield an outcome of the de-
sired/required quality. The facing blades must be
sharp and the rotating blade
supports, in a good condition.
7 Service and Maintenance
• Clean the machine completely at the end of every job, especially if
it is going to be stored for a prolonged period of time.
• Check that the shafts along which the movable parts move are always
clean and lubricated.
• Check the clamps and their locking/tightening mechanism for proper
operation.
• Check the PTFE coating of the heating element. Its surfaces should
be homogeneous and without scratches. If the material homogeneity
is compromised or the piece is damaged, it should be replaced.
• Check the facing tool for proper condition, in particular the blades
must be sharp. The blades can be turned once and work can go
on with their second sharp edge. When both edges are worn, the
blades must be replaced. Do not attempt to sharpen the blades on
your own, as such sharpened blades tend to be a hazard for the
workers and cannot ensure a proper facing outcome.
8 Service and Repair Contact
Hürner Schweisstechnik
Nieder-Ohmener Str. 26 Tel.: +49 (0)6401 9127 0
35325 Mücke, Germany Fax: +49 (0)6401 9127 39
Web: www.huerner.de E-mail: info@huerner.de
Info
We reserve the right to make technical changes to the product
without prior notice.
Pursuant to the directive 2002/96/EC on Waste Electrical and Electronic
Equipment (so-called WEEE Directive), equipment that was manufactured
or distributed by ourselves may be returned to us. To discuss the exact
procedure we will follow, please contact us with the details above.
We also declare that equipment manufacture complies to the directive
2002/95/EC on the restriction of the use of certain hazardous substances
in electrical and electronic equipment (so-called RoHS Directive).
9 Product Components/Spares
Reducer Insert 160 / 40 200-260-701
Reducer Insert 160 / 50 200-260-702
Reducer Insert 160 / 63 200-260-703
Reducer Insert 160 / 75 200-260-704
Reducer Insert 160 / 90 200-260-705
Reducer Insert 160 / 110 200-260-706
Reducer Insert 160 / 125 200-260-707
Reducer Insert 160 / 140 200-260-708
Replacement Facing Blade 200-260-709
Handheld Welding Element HSB 190 200-230-039