EN
6
Time setting procedure (RTC
–
real-time clock)
Press DOWN (5) key until "Min" parameter code
appears on a display.
Use UP (1) and DOWN (5) keys to view the
parameters.
TO MODIFY A VALUE: press SET (6) key, then UP (1)
and DOWN (5) keys.
TO CONFIRM THE VALUE: press SET (6) key.
TO EXIT RTC MENU: press SET (6) + UP (1) keys simultaneously or wait for 5 seconds.
Displaying/changing a defined temperature value in Temperature maintenance stage
TO DISPLAY: press SET (6) key; the defined
maintained temperature value for the selected
cycle will be displayed for 5 seconds.
TO MODIFY: when the defined temperature value is displayed, press and hold SET button
until a flashing code of HdS parameter is displayed on the screen. Use UP and DOWN keys to
change the value.
TO CONFIRM: press SET key to confirm the
selected value and exit the menu.
Cycle change procedure:
1. Press and hold CYCLE (3) key for a few
seconds until the first parameter (CyS) is displayed on the screen.
2. Use UP and DOWN keys to view parameters.
3. To change a parameter, press SET key and use the arrow keys.
4. Confirm the new value by pressing SET key.
5. The new value is recorded in memory even if programming mode is exited upon the
timeout.
3.
USING THE KEYBOARD IN CYCLES 1, 2, 3, 4
Displaying the temperature: heat regulator sensor
temperature readings are displayed on the upper
screen. The bottom screen displays the
temperature readings of the thermal probe (if
active) or countdown timer value. Pressing DOWN
successively allows to display iP1, iP2, iP3 probe
readings and countdown timer value in sequence.
Displaying the stage: press UP key to display the
current stage on the screen.
Settings display order:
Pressing SET key displays the following information successively:
- rSI = cabinet temperature setting value
