manualshive.com logo in svg

Hunter I2C-800-M, Руководство пользователя, Страница: 28 / 36

Поделиться
Скачать
Hunter I2C-800-M Скачать руководство пользователя страница 28

28

 

       hunter.direct/ICC2help

Programming the Controller

SETTING SYSTEM OFF

To completely stop all irrigation, including any stations which 
are already running, turn the dial to the System Off position. 
“OFF” will appear on the display and within a few seconds, any 
stations that were running will shut down. No new automatic 
programming will be allowed to start while the controller is 
in the System Off position. To return the controller to normal 
operation, simply reset the dial to the Run position.

PROGRAMMABLE RAIN OFF

This feature permits the user to stop all programmed 
watering for a designated period from 1 to 31 days. At the 
end of the programmable rain off period, the controller will 
resume normal automatic operation.

1. 

Turn the dial to the System Off position, and wait for the 
“OFF” to stop blinking.

2. 

Press the + and – buttons to set the number of days to 
remain off.

3. 

Turn the dial back to the Run position. The display will 
show how many days off remain. The days off remaining 
will decrease at midnight of each day. Once it reaches 0, 
the display will revert to show the normal time of day, and 
automatic irrigation will resume at the next scheduled 
start time.

Note: To cancel Programmable Rain Off settings, turn the dial 
to the System Off position, wait for the “OFF” to stop blinking, 
and turn the dial back to the Run position.

Содержание I2C-800-M





































Отзывы:

Нет отзывов