Hunter ACC-1200 Скачать руководство пользователя | Manualshive

Страница: 82 / 100

background image

75

eVenT mode opTIons (aGC, surVeyor) ......................................

Event Mode is a special function of the controller designed
to work with Surveyor Golf control software.

Event mode allows the controller to run individual station
events which have been created for it by golf control
software. These events may not be created or edited in
the controller, and only special software can operate the
controller in this mode.

If you are not using Surveyor control software,
you should never use the Event Mode options.

The normal operating mode of the controller is called
FCP mode (“Field Controller Programs”). This means the
controller will use Programs A, B, C, D, E, and F normally.

If the controller is switched to Event mode, the A through F
Programs will not run.

Change to Event Mode: This will switch the controller to
the System Event mode (Surveyor Golf customers, only).

Turn the dial to Advanced Features. Press the + button.
Arrow down to Event Mode Options. Press the + button.
The first selection is Change to Event Mode.

The display will advise that this will run System Events
instead of programs A-F. If Event mode is selected, the
display will always show System Event Mode On when the
dial is in the Run position.

There is no special display when the controller is in the
normal FCP mode… as long as System Event Mode On is
not displayed at the Run position, the controller is in the
conventional FCP mode.

The Event Mode Options screen allows the user to view
three other selectable screens. While in the Event Mode
Options screen, simply highlight the desired selection and
press the + button. The three selections available are View
System Events, Event Count, and Delete Events. These
are only used in Surveyor Golf applications, to verify
downloaded schedule information.

View System Events: This will allow you to view System
Events for 1 to 3 days worth of downloaded System
Events.

The AGC/ACC controllers are always either in Event mode,
or FCP mode. The controllers can never be in both modes
at once.

«
...
80
81
82
83
84
...
»

Содержание ACC-1200





































































































Отзывы:

Нет отзывов

Похожие инструкции для ACC-1200

Бренд: GBD Страницы: 12

Бренд: Faber Страницы: 8

Бренд: Waterway Страницы: 16

Бренд: Mamas & Papas Страницы: 16

Бренд: Magnescale Страницы: 132

Бренд: Parker Страницы: 32

Бренд: Rayrun Страницы: 4

AeGIS 7000 Series

Бренд: PACH & COMPANY Страницы: 2

Compact Comfort VAV12

Бренд: SAI HVAC Страницы: 16

Бренд: Saitek Страницы: 15

Бренд: saia-burgess Страницы: 203

Бренд: Sailor Страницы: 1

Бренд: Union Instruments Страницы: 63

Бренд: YASKAWA Страницы: 49

Бренд: M-system Страницы: 17

Бренд: baby joy Страницы: 11

ibaMS16-DI-220V Series

Бренд: IBA Страницы: 32

Бренд: GE Страницы: 32

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды