Hunter Douglas ALPHA Series, Инструкция по установке и измерениям

Страница: 47 / 52

Page 45
INSTALLING THE ROLLER TUBE - CONTINUED
Insert the square drive shaft into the idle end of the drive blind so only 40mm (*) is protruding into the drive end of the
second blind. Use an Allen key to secure the collar against the idle end of the drive blind.
Repeat step B above ensuring the bottom rails are as close to level as possible. For final blind insert idle pin into the
standard tube idle end and position into idle end bracket. Use an Allen key to secure the collar against the drive end
of the idle blind
Un-wind the fabric on all blinds and use an Allen key through the 6mm drilled hole in the roller tube to lock the grub
screw on the square shaft in location. This will ensure the bottom rails roll up evenly.
Install all other components as per the normal installation process for that style of ALPHA awning.
C
*
D
ALPHA AWNING SERIES INSTALLATION MANUAL