Hunter Douglas ALPHA Series, Инструкция по установке и измерениям

Страница: 22 / 52

Page 20
STEP 1 - INSTALL HEADBOX OR OPEN ROLLER
STEP 2 A - PREPARE THE BOTTOM CABLE
BRACKET
Eclip
Barrel
Bottom Cable Bracket
Tension Pin
Refer to the following sections for instructions
i - open roller install (pg7)
ii - headbox install (pg9)
NOTE:
cable guide installation bracket will come with top
cable bracket pre attached
Use a string line or sprit level from the edge of the blind
bracket or side of the headbox to determine the correct
location of the wire guide bottom bracket.
NOTE: The bottom bracket is universal and can be used
for wall, floor or reveal mounting.
- Remove the Eclip from the barrel using screw driver or
pointy nose plyers.
- unscrew the bottom tension pin from the bottom of the
wire.
- remove the barrel from the bracket.
STEP 2 B - INSTALL THE BOTTOM CABLE
BRACKET
STEP 2 C - SECURE THE BARREL
Barrel Lip
Place the bottom cable bracket on the location mark and
fix into place with the appropriate fixings.
Once bracket is fixed to ground/wall, slide in barrel, ensure
the “lip” of barrel is facing towards the awning fabric.
Insert the Eclip around the “lip” of the barrel to ensure
the barrel is secure.
STEP 3 A - ATTACH WIRE TO BOTTOM BRACKET STEP 3 B - ATTACH FLOATING END CAP TO WIRE
Lock Nut
Insert the Tension pin through the barrel and screw to the
bottom of the wire, turn 3 - 4 times to secure.
Unwind the wire and feed floating end cap onto the wire.
ALPHA CABLE GUIDE AWNING INSTALLATION
Reveal” Install
through this location
Top Cable Bracket
ALPHA AWNING SERIES INSTALLATION MANUAL