Hunt HNC301?VD, Краткое руководство по эксплуатации

Страница: 6 / 36

Network Dome Camera ∙ Quick Operation Guide
5
ral devices to one power adapter as
to the power
dor or noise rise from the device, turn off the power
ct
Cautions
Make sure the p supply voltage is correct be re using the
or s k.
dule
necessary, use clean cloth w hanol and wipe it
gently. If the camera will not be used for an extended period,
please replace the lens cap to protect the sensor from dirt.
Do mera at the sun or extra bright places.
y
Do not connect seve
adapter overload may cause over ‐ heating or a fire hazard.
Please make sure that the plug is firmly connected
socket. When the product is mounted on wall or ceiling, the
device shall be firmly fixed.
If smoke, o
at once and unplug the power cable, and then please conta
the service center.
ower fo
camera.
Do not drop the camera
Do not touch sensor mo
ubject it to physical shoc
s with fingers. If cleaning is
ith a bit of et
not aim the ca
Blooming or smearing may occur otherwise (which is not a
malfunction), and affect the endurance of sensor at the same
time.
The sensor may be burned out by a laser beam, so when an
laser equipment is in using, make sure that the surface of
sensor will not be exposed to the laser beam.