Hunt HNC301?VD, Краткое руководство по эксплуатации

Страница: 13 / 36

Network Dome Camera ∙ Quick Operation Guide
12
e is no reflective surface too close to the
light from the camera may reflect back into
ing reflection.
ra body so that the foam ring
the edge of the bubble with the screw
Figure 2 ‐ 1 Remove the Bubble and Black Liner
Make sure that ther
camera lens. The IR
the lens caus
The foam ring around the lens must be seated flush against the
inner surface of the bubble to isolate the lens from the IR LEDS.
Fasten the dome cover to came
and the dome cover are attached seamlessly.
2.1 Disassembling
Steps:
1. Loosen the three screws on
driver.
2. Open the bubble and remove the inner black liner as shown
in Figure 2 ‐ 1.
Black Liner
Screw Hole
Bubble