Hughes HN9000, Руководство по установке

Страница: 84 / 126

Corrective action Explanation State name State code
Verify cabling and pointing. If antenna
has moved or been disturbed, re-point
it. Modem is not receiving transmission
information packets from satellite. No TIPs 28
Verify cabling and pointing. If antenna
has moved or been disturbed, re-point
it. Tx cable connectivity tests have failed. Tx Connectivity Down 29
Rain or snow can cause this condition.
If it continues during clear weather, Bad slots are transmissions from the
modem that are not received by the
Too Many Bad Slots 30
verify cabling and pointing. If antenna satellite. State code 30 indicates a
has moved or been disturbed, re-point
it. percentage of bad slots within the last
hour that exceeds a preset value.
Transient – No action is necessary.
Transmitter has been shut down due
to ECL. ECL measures total ECL Active 31
transmitted power over 30- minute
periods and turns off the transmitter
if the total power exceeds a preset
limit imposed by the FCC.
Restricted states
(NOCC-imposed restrictions)
Call Installer Support with site name
to resolve the issue. Modem has been barred from
transmitting by the NOCC. Possible
reasons for barring include Barred 32
interference isolation, uplink failure,
or government order.
Call Installer Support with site name
to resolve the issue. Modem has been put in a suspended
state by the NOCC. This occurs if a
customer’s bill is overdue or if service
is terminated. Suspended 33
Call Installer Support with site name
to resolve the issue. Modem has been put in maintenance
state by the NOCC. Maintenance 34
Call Installer Support with site name
to resolve the issue. Modem has been put in out-of-service
state by the NOCC. Out of Service 35
Viewing the state codes list
To view a list of state codes with an explanation of each code:
1. Click the underlined state code number.
70
HN9000 Satellite Modem Installation Guide
1037576-0001 Rev. A
Chapter 8