Hughes HN9000, Руководство по установке

Страница: 105 / 126

The Internet Protocol Properties dialog appears as shown in Figure 63: Internet Protocol Properties – Windows XP
on page 91.
Figure 63: Internet Protocol Properties – Windows XP
8. On the General tab, ensure that both the Obtain an IP address automatically and Obtain DNS server address
automatically options are selected. If not, select them.
9.
Click
OK
.
10. Confirm that you have an IP address:
a) Click
Start Run
.
b) Type cmd and click OK .
c) Type ipconfig/renew
and press Enter .
d) Make sure an IP address is shown on the line that starts with IP Address .
Configuring Windows 2000 to use DHCP
This section explains how to configure your computer to use DHCP if your computer operating system is Microsoft
Windows 2000.
1. From the Windows desktop, select Start Settings Control Panel .
2. Double-click the Network and Dialup Connections icon in the Control Panel window.
A list of network connections appears. A Local Area Connection icon must appear on this page. If it does not, the
network is not installed correctly.
3. Right-click the Local Area Connection icon that represents the satellite modem network connection, and select
Properties
as shown in Figure 64: Accessing Local Area Connection Properties – Windows 2000 on page 98.
91
Chapter 12 HN9000 Satellite Modem Installation Guide
1037576-0001 Rev. A