background image

12

Installing the system

The two different 
power supplies

Verify that you are using the correct power supply.

For the two-way system, the part number should be 
either P/N:1029075-0001 (domestic use only) or 
1030875-0001 (domestic and international use). 
See Figure 8. 

If your power supply part number is P/N: 
1029076-0001, you have the wrong power supply 
(it can only be used with the one-way system). Call 
customer service for help

.

The two satellite 
modems

There are two satellite modems: the receive modem 
and transmit modem. The receive modem receives 
data via satellite. It is labeled Receive on its front 
right. The transmit modem transmits data via the 
satellite. It is labeled Transmit on its front right. 
To aid heat dissipation, install the receive modem 
on top of the transmit modem. 

CAUTIONS

• When power needs to be removed from the 

receive modem, ALWAYS unplug the ac 
power cord from either the wall outlet, surge 
protector, or power strip.

• NEVER pull the power cord from the back of 

the receive modem. Doing so could damage 
the pins and also cause a short in the 
system.

• The power supply with the part number 

1029075-0001 is to be used only in the 
United States and Canada.

• This unit must be used with 110-volt ac 

input.

• Other countries may have different 

standards and requirements.

Содержание Direcway DW4000















































































Отзывы: