Hughes Network HN9260, Руководство по установке

Страница: 64 / 122

Chapter 5 • Completing the installation
64
1039434-0001 Revision A
6. Wait 15 minutes after completing registration for all files to be downloaded from
the NOC to the modem.
7. If
All files are up-to-date
does not appear after 15 minutes, restart
the modem:
a. Go to the System Control Center home page.
b. In the Help section, click
Restart HN9260
.
8. If you do not see the
All files are up-to-date
message, power cycle the
satellite modem:
a. Unplug the power cord from the power source.
b.
If the modem is connected to a DC power source , unplug the DC input cable
from the modem’s power supply.
c. Wait 5 sec.
d. Plug the power cord back into the power source.
e.
If the power source is DC , plug the input cable back into the power supply.
Do not power cycle the satellite modem by unplugging the power cord from the
modem’s rear panel. Doing so could result in static electricity discharge that
could shock you and/or damage the modem.
Connecting the satellite modem to the customer's computer
Use an Ethernet cable to connect the modem to the customer’s computer as shown
in
Figure 48 .
Figure 48: Connecting the HN9260 to the customer’s computer
CAUTION