Hughes Network HN9260, Руководство по установке

Страница: 33 / 122

Chapter 4 • Commissioning the satellite modem
1039434-0001 Revision A
33
4. Click Config File Upload .
Note: Do not click
Zip Code File Upload
—this button is used to update the ZIP code
table in the modem.
Note: The following apply to the screen illustrations in this installation guide:
•
Most screen illustrations show only the relevant part of the screen and do not
include features such as browser menus, toolbars, and window borders.
•
The screen illustrations are examples . Values shown in these illustrations may
not apply to the satellite modem you are installing. Do not use values shown
to install or configure the modem unless the instructions say to do so.
•
On some screens and in some messages you may see the word terminal or the
abbreviation VSAT . Both refer to the HN9260 satellite modem.
•
Screen and page are both used to refer to a set of information from your
computer or satellite modem that is displayed on your computer monitor.
The Configuration File Upload screen appears.
Figure 12: Configuration File Upload screen
5. Click
Browse
on the Configuration File Upload screen.
6. Navigate to the location on the installer laptop where you saved the
sbc.cfg
file.
7. Select the
sbc.cfg
file and click
Open
.
8. Click
Upload
, and wait for the upload to complete.