Hughes Network HN9260, Руководство по установке

Страница: 58 / 122

Chapter 4 • Commissioning the satellite modem
58
1039434-0001 Revision A
This screen shows the Site ID, the modem’s IP address (Terminal IP Address), and
the modem’s subnet mask (Terminal Subnet Mask).
2. If a printer is available, click
Print this Page
to print the Registration screen.
3. Give the printout to the customer.
The customer will need this information if they ever need to contact their service
provider for assistance. If no printer is available, advise the customer to record
this information and make sure they know where it is recorded. Make sure the
customer knows where this information is recorded.
4. Click
Continue
to download configuration parameters to the modem.
A second Registration in Progress screen appears briefly (not shown here) while
the configuration parameters are downloaded. Then the Registration Complete
screen appears.
5. Click
Restart
on the Registration Complete screen.
This restarts the satellite modem.
Figure 43: Registration complete - restarting the modem
The Terminal Reset screen appears. (It is not shown here.)
6. Click
Close
on the Terminal Reset screen.
The modem is now commissioned.
Manual commissioning
If satellite-based commissioning is not available, you must commission the modem
manually. However, do not use the manual commissioning method unless you are
instructed to do so by the service provider.
Manual commissioning requires coordination between you and the Network
Operations Center (NOC). A technician enters parameters at the NOC, and you enter
the same parameters at the installation site. The NOC also downloads encryption
keys and certain parameters to the modem. Manual commissioning consists of: