UO-EPB-1
Operating and configuration instructions
12
UO-EPB1_Manual-en_R1
4.3 Bus addressing
The addressing switch can be used to define the bus address:
x 10
= tens digit
x 1
= ones digit
4.4 Connecting the module to the Profibus
After installing the module and connecting it to the power supply, connect the module to the Profi-
bus system. This example describes the process using the COM PROFIBUS V 5.0 installation
software and the PROFIBUS-DP master IM308C.
First, copy the manufacturer-specific bitmap files (.bmp, .dib) into the BITMAPS directory and
copy the GSD file into the GSD directory of the COM PROFIBUS software. Then start the COM
PROFIBUS installation software. Create a new configuration file using the NEW menu item under
the FILE menu, or access a configuration file via the OPEN menu item. Then read in the GSD file
in the menu item READ IN GSD FILES.
Now, search for type IM308C under the DP master and search for HÜBNER encoder AMP1212
under DP slave / encoder, then double click to integrate these into the bus graphic in the right
window.
Use the menu PLAN / PLAN DP SLAVE or right click on the encoder symbol and PROPERTIES
to access the SLAVE PROPERTIES window. Enter the module bus address matching the pre-
selector switches on the module. Then continue using the CONFIGURE menu item.
Encoder
Master
