Huawei VP9050 Скачать руководство пользователя страница 104

Страница: 104 / 124

HUAWEI VP9050 Executive Video Terminal

User Guide

13 Maintenance and Troubleshooting

Issue 03 (2011-12-10)

Huawei Proprietary and Confidential

Table 13-8

Troubleshooting methods for the problems associated with video

Problem

Possible Cause

Solution

The terminal is

powered on but is

not in a conference.

The display,

however, does not

show the user

interface or the local

video.

The display is powered off.

Power on the display.

The video channel of the

display is selected incorrectly.

Set the video channel correctly

using the remote control.

The video settings of the

terminal or the display are

incorrect. For example, the

brightness is set to 0.

Set the video parameters of the

terminal and the display to default

values.

The video cable is not

connected securely.

Connect the display to the terminal

using the video cable properly.

The terminal is

powered on but is

not in a conference.

The user interface

can be displayed

properly. The local

video, however, is

displayed as a blue

screen.

The camera connected to the

interface that is set as the

video source is powered off or

is in a hibernation state.

Power on or activate the camera.

The terminal is

powered on but is

not in a conference.

The local video is

displayed properly.

The user interface,

however, cannot be

displayed.

No display is connected to the

interface that is set as the

output interface of the user

interface or the relevant

display is faulty.

Connect a display to the interface

that is set as the output interface of

the user interface, and then set

relevant video parameters

correctly.

The terminal system does not

respond to operations

performed with the remote

control.

Telnet to the terminal. If the

operations still fail on the terminal,

the terminal system is faulty.

Restart the terminal. If the

problem persists, contact the

relevant distributor for

maintenance.

After the local site

joins a conference,

the local video can

be displayed

properly but the

remote video cannot

be displayed.

Check the local and remote

loopback status. A local or

remote loopback test is being

performed.

Stop all local and remote loopback

tests.

Check the call statistics. If the

video bandwidth is 0, it

indicates that no video is sent

from the remote site.

Contact the administrator of the

remote site to solve this problem.

If the remote video is

displayed as a blue screen, the

remote site hides its video by

sending a blue screen.

Contact the administrator of the

remote site to solve this problem.

Содержание VP9050





























































































































Результаты поиска

Содержание VP9050

Отзывы:

Похожие инструкции для VP9050

Бренды по названию

Популярные бренды

Huawei VP9050, Руководство пользователя

Результаты поиска

Содержание VP9050

Отзывы:

Похожие инструкции для VP9050

Бренды по названию

Популярные бренды