manualshive.com logo in svg

Huawei UA5000, Руководство пользователя

Описание продукта Huawei UA5000: чтобы настроить и использовать устройство правильно, загрузите бесплатное руководство по эксплуатации с manualshive.com. В нем содержится вся необходимая информация о настройке и функциях устройства. Не забудьте скачать его с manualshive.com для успешного использования Huawei UA5000.

Поделиться
Скачать
background image

If the planned data is the same as the query result, the parameters need not be configured.
If the parameters need to be modified, run the 

power charge

 command.

5.

Configure the battery management parameters.

huawei(config-if-power4875l-0)#

power battery parameter 0.15 60 1 150

6.

Configure the temperature compensation coefficient of the battery.
If the planned data is the same as the query result, the parameters need not be configured.
If the parameters need to be modified, run the 

power battery temperature

 command.

7.

Configure the power supply load power-off and battery set power-off parameters.
If the planned data is the same as the query result, the parameters need not be configured.
If the parameters need to be modified, run the 

power off

 command.

8.

Configure the power distribution parameters.
If the planned data is the same as the query result, the parameters need not be configured.
If the parameters need to be modified, run the 

power supply-parameter

 command.

9.

Configure the battery discharging test parameters.

huawei(config-if-power4875l-0)#

power battery-test auto-test off-test forbid 

time-test permit 180 1

10. Configure the rectifier unit parameter.

huawei(config-if-power4875-0)#

power module-num 2 1 2

11. Configure the load and battery high-temperature power-off parameters.

huawei(config-if-power4875l-0)#

power temperature-off load-off-state forbid 

load-off-temperature 70 battery-off-state permit battery-off-temperature 53

12. Configure the environment parameters.

l

Configure the temperature parameters.

huawei(config-if-power4875l-0)#

power environment temperature 68 -5 80 -20

l

Configure the humidity parameters.
If the planned data is the same as the query result, the parameters need not be configured.
If the parameters need to be modified, run the 

power environment humidity

 command.

13. Configure the extended digital parameters.

huawei(config-if-power4875l-0)#

power outside_digital 0 available-level low-

level name Fan

huawei(config-if-power4875l-0)#

power outside_digital 1 available-level low-

level name HABF_FAN

huawei(config-if-power4875l-0)#

power outside_digital 3 available-level low-

level name SPD

huawei(config-if-power4875l-0)#

power outside-digital 4 available-level high-

level name Smoke

huawei(config-if-power4875l-0)#

power outside-digital 5 available-level low-

level name HEX

huawei(config-if-power4875l-0)#

power outside-digital 6 available-level low-

level name MDF-door

14. Query the information about the configured parameters and environment parameters of the

power system.

huawei(config)#

interface emu 0

huawei(config-if-power4875l-0)#

display power system parameter

  EMU ID: 0                             Power system information
  ----------------------------------------------------------------------------
  charge control state  : automatic control                                   
  equalizing Voltage : 56.500V    floating Voltage: 53.500V                   
  charge lmt quotiety: 0.150        equalizing time   : 60 days               
  battery number     : 1                                                      
  battery 0 capacity : 150  AH                                                
  battery temperature test upper :  80C  battery temperature test lower: -20C 
  temperature redeem quotiety    : 80mV                                       

UA5000 Universal Access Unit
Environment Monitoring

7 EPS75-4815AF Monitoring Solution

Issue 01 (2012-08-17)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

118

Содержание UA5000


















































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для UA5000

D-Link DWR-730 Configuration Manual preview
DWR-730
Бренд: D-Link Страницы: 9
D-Link DWL-7100AP Quick Install Manual preview
DWL-7100AP
Бренд: D-Link Страницы: 52
D-Link DWL-3140AP - Web Smart PoE Thin Access Point Install Manual preview
DWL-3140AP - Web Smart PoE Thin Access Point
Бренд: D-Link Страницы: 16
D-Link DWL-3140AP - Web Smart PoE Thin Access Point User Manual preview
DWL-3140AP - Web Smart PoE Thin Access Point
Бренд: D-Link Страницы: 46
D-Link DWL-2100AP - AirPlus Xtreme G Command Line Interface Reference Manual preview
DWL-2100AP - AirPlus Xtreme G
Бренд: D-Link Страницы: 29
D-Link DWL-2100AP - AirPlus Xtreme G Install Manual preview
DWL-2100AP - AirPlus Xtreme G
Бренд: D-Link Страницы: 12
D-Link DIR-320NRU Quick Installation Manual preview
DIR-320NRU
Бренд: D-Link Страницы: 37
D-Link DAP-3220 Install Manual preview
DAP-3220
Бренд: D-Link Страницы: 10
D-Link DAP-2330 v 1.0 Quick Install Manual preview
DAP-2330 v 1.0
Бренд: D-Link Страницы: 16
D-Link DAP-1160 Quick Install Manual preview
DAP-1160
Бренд: D-Link Страницы: 32
D-Link D DWL-8200AP DWL-8200AP Quick Install Manual preview
D DWL-8200AP DWL-8200AP
Бренд: D-Link Страницы: 10
D-Link D DWL-8200AP DWL-8200AP User Manual preview
D DWL-8200AP DWL-8200AP
Бренд: D-Link Страницы: 97
D-Link D DWL-8200AP DWL-8200AP Install Manual preview
D DWL-8200AP DWL-8200AP
Бренд: D-Link Страницы: 16
D-Link D DWL-8200AP DWL-8200AP Manual preview
D DWL-8200AP DWL-8200AP
Бренд: D-Link Страницы: 129
D-Link AirPremier DWL-7700AP Install Manuals preview
AirPremier DWL-7700AP
Бренд: D-Link Страницы: 12
D-Link AirPremier DWL-7700AP User Manual preview
AirPremier DWL-7700AP
Бренд: D-Link Страницы: 84
D-Link DWL-7100AP Manual preview
DWL-7100AP
Бренд: D-Link Страницы: 76
D-Link DWL-7100AP Quick Installation Manual preview
DWL-7100AP
Бренд: D-Link Страницы: 8

Бренды по названию

Популярные бренды

Загрузить еще бренды