manualshive.com logo in svg

Huawei SUN2000-2KTL-L1, Руководство пользователя, Страница: 52 / 122

Поделиться
Скачать
Huawei SUN2000-2KTL-L1 Скачать руководство пользователя страница 52

NO TICE

● Keep the DC input PV+ cable and PV– cable close to each other.
● Cables with high rigidity, such as armored cables, are not recommended as DC

input power cables, because poor contact may be caused by the bending of the

cables.

● Before assembling DC connectors, label the cable polarities correctly to ensure

correct cable connections.

● After crimping the positive and negative metal terminals, pull the DC input

power cables back to ensure that they are connected securely.

● Insert the crimped metal terminals of the positive and negative power cables

into the appropriate positive and negative connectors. Then pull back the DC

input power cables to ensure that they are connected securely.

Figure 5-14 Assembling a DC connector

NO TE

● If the PV string is not configured with an optimizer, use a multimeter to measure the

voltage at the DC position. The multimeter must have a DC voltage range of at least

600 V. If the voltage is a negative value, the DC input polarity is incorrect and needs

correction. If the voltage is greater than 600 V, too many PV modules are configured to

the same string. Remove some PV modules.

● If the PV string is configured with an optimizer, check the cable polarity by referring to

the Smart PV optimizer quick guide.

WARNING

Before performing 

Step 2

, ensure that the DC switch is set to OFF.

SUN2000-(2KTL-6KTL)-L1

User Manual

5 Electrical Connection

Issue 04 (2021-04-01)

Copyright © Huawei Technologies Co., Ltd.

46

Содержание SUN2000-2KTL-L1



























































































































Отзывы:

Нет отзывов