Huawei SUN2000-2KTL-L1 Скачать руководство пользователя страница 3

Страница: 3 / 122

About This Document

Purpose

This document describes the SUN2000-(2KTL-6KTL)-L1 (SUN2000 for short) in

terms of its installation, electrical connection, commissioning, maintenance, and

troubleshooting. Before installing and operating the SUN2000, ensure that you are

familiar with the features, functions, and safety precautions provided in this

document.

Intended Audience

This document is applicable to:
●

Installers

●

Users

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol

Description

Indicates a hazard with a high level of risk which, if not

avoided, will result in death or serious injury.

Indicates a hazard with a medium level of risk which, if

not avoided, could result in death or serious injury.

Indicates a hazard with a low level of risk which, if not

avoided, could result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not

avoided, could result in equipment damage, data loss,

performance deterioration, or unanticipated results.
NOTICE is used to address practices not related to

personal injury.

SUN2000-(2KTL-6KTL)-L1

User Manual

About This Document

Issue 04 (2021-04-01)

Содержание SUN2000-2KTL-L1



























































































































Результаты поиска

Содержание SUN2000-2KTL-L1

Отзывы:

Huawei SUN2000-2KTL-L1, Руководство пользователя, Страница: 3 / 122

Результаты поиска

Содержание SUN2000-2KTL-L1

Отзывы: