S1700 Managed Series Ethernet Switches
Web User Manual
3 System Management
S1700 Managed Series Et hernet Swi tches
Issue 05 (2012-10-25)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
16
Set Device Name of Switch
Step 1
Click System Management > System Configuration, to bounce a webpage as shown in Fig.3-5
Step 2
Enter the device name of switch into Device Name field.
Step 3
Click Apply button to apply all the changes made.
----End
3.6 SNTP
In network, it is very important to configure time synchronization of entire network,
particularly the causality of event can be detected based on the time of log entry. SNTP
(simple network time protocol) is mainly applied to synchronizing clocks of computers in the
network.
Click System Management > SNTP, to configure the system time, the configuration page is
shown as follows.
Figure 3-6
SNTP Configuration
Table 3-6
Parameters of SNTP Configuration
Item
Description
SNTP Global
Choose to enable/disable the SNTP function.
SNTP
Server
Configuration
Server List: Enter the IP addresses of the primary and
secondary SNTP server from which the switch will obtain the
time settings.
Query Interval: This is the interval between requests for
updated SNTP information. (Range: 30-99999; Default: 720
seconds)
Time Zone
Set your local time zone.
System Current Time
Display current time of switch.
