HUAWEI RP100-55T Room Presence
User Guide
5 Conference Initiation
Issue 01 (2013-12-20)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
37
If the selected entry is a conference, press
or
on the remote control twice
consecutively to initiate a multi-party conference.
Press
to edit the entry or
to delete the entry.
----End
5.1.3 Initiating a Conference from the Address Book Screen
If sites to participate in a conference are stored in the local address book, you can define these
sites and set conference parameters from the
Address Book
screen to initiate a conference.
To initiate a conference from the
Address Book
screen, do the following:
Step 1
From the home screen, select
Address Book
to display the
Address Book
screen.
Step 2
Select a site or multiple sites participating in the conference.
If you select a site, you can press
on the remote control, and then select
Place Call
to place a call to the site immediately or
Create Conference
to initiate a conference.
If you select multiple sites, you can press
on the remote control to initiate a
conference.
Press
to edit the selected site or
to delete the selected site.
----End
5.1.4 Initiating a Conference from the Call Screen
You can initiate a two-party conference by defining the site to participate in the conference
and setting the call rate and call type from the
Call
screen.
To initiate a conference from the
Call
screen, do the following:
Step 1
From the home screen, select
Call
to display the
Call
screen.
From the home screen, you can access the
Call
screen directly by pressing a number key on the remote
control.
Step 2
Enter the name, IP address, or telephone number of the site. Then set the call rate and call
type.
Step 3
Press
on the remote control to call the other party.
----End
5.1.5 Scheduling a Conference
You can schedule a conference to be held during a specific period.
The RP100-55T supports the function to schedule conferences when H.323, E1, or 4E1 lines
are used.