Configuration Procedure
Figure 3-4
Flowchart of configuring a device to communicate with an NM Station by running
SNMPv1
3.2.1 Configuring Basic SNMPv1 Functions
After basic SNMP functions are configured, an NM station can perform basic operations such
as Get and Set operations on a managed device, and the managed device can send alarms to the
NM station.
Context
Steps
, and
are mandatory to configure basic SNMP functions. After the configuration is
complete, basic SNMP communication can be established between the NM station and managed
device.
Procedure
Step 1
Run:
system-view
The system view is displayed.
Step 2
(Optional) Run:
snmp-agent
The SNMP agent function is enabled.
By default, the SNMP agent function is disabled. By executing the
snmp-agent
command with
any parameters can enable the SNMP agent function.
Step 3
Run:
snmp-agent sys-info
version
v1
The SNMP version is set.
By default, SNMPv3 is enabled.
HUAWEI NetEngine5000E Core Router
Configuration Guide - System Management
3 SNMP Configuration
Issue 01 (2011-10-15)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
57