manualshive.com logo in svg

Huawei NetEngine5000E, Руководство по настройке

Поделиться
Скачать
Huawei NetEngine5000E Скачать руководство пользователя страница 3

About This Document

Intended Audience

This document provides the basic concepts, configuration procedures, and configuration
examples in different application scenarios of the System Management feature supported by the
NE5000E device.

This document describes how to configure the Basic Configurations feature.

This document is intended for:

l

Data configuration engineers

l

Commissioning engineers

l

Network monitoring engineers

l

System maintenance engineers

Related Versions (Optional)

The following table lists the product versions related to this document.

Product Name

Version

HUAWEI NetEngine5000E
Core Router

V800R002C01

 

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol

Description

Indicates a hazard with a high level of risk, which if not
avoided, will result in death or serious injury.

Indicates a hazard with a medium or low level of risk, which
if not avoided, could result in minor or moderate injury.

HUAWEI NetEngine5000E Core Router
Configuration Guide - System Management

About This Document

Issue 01 (2011-10-15)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

ii

Содержание NetEngine5000E












































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды