Step 2
Run:
system-view
The system view is displayed.
Step 3
Run:
clock timezone
time-zone-name
{
add
|
minus
}
offset
The time zone is set.
l
To obtain the time of the time zone, you can add
offset
to the UTC standard time if
add
is
specified in the command.
l
To obtain the time of the time zone, you can minus
offset
from the UTC standard time if
minus
is specified in the command.
Step 4
Run:
clock daylight-saving-time
time-zone-name
one-year
start-time start-date end-time end-date
offset
or,
clock daylight-saving-time
time-zone-name
repeating
start-time
{ {
first
|
second
|
third
|
fourth
|
last
}
weekday month
|
start-date
}
end-time
{ {
first
|
second
|
third
|
fourth
|
last
}
weekday month
|
end-date
}
offset
[
start-year
[
end-year
] ]
The daylight saving time is set.
----End
Checking the Configuration
Run the
display clock
command to display the system time.
<HUAWEI>
display clock
2010-07-20 10:04:21
Tuesday
Time Zone : Default Zone Name add 00:00:00
2.6 Maintaining NTP
This section describes how to maintain NTP. Maintaining NTP helps you to monitor the NTP
operating status.
2.6.1 Monitoring the NTP Running Status
By running the display command, you can monitor the operation of NTP.
Context
In routine maintenance, you can run the following commands in any view to monitor the NTP
running status.
HUAWEI NetEngine5000E Core Router
Configuration Guide - System Management
2 NTP Configuration
Issue 01 (2011-10-15)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
34
