manualshive.com logo in svg

Huawei NetEngine5000E, Руководство по настройке

Поделиться
Скачать
Huawei NetEngine5000E Скачать руководство пользователя страница 135

Figure 6-1

 Role of each device in NetStream

RouterA

RouterB

NSC

NSC

NDA

 

6.2 NetStream Features Supported by the NE5000E

This section describes the usage scenarios of NetStream features supported by the NE5000E and
available NetStream functions.

Sampling and Statistics Collection of IPv4 Flows

The NE5000E supports the sampling and statistics collection of original IPv4 flows, including
unicast and multicast packets, packets discarded by the uRPF/RPF check, and fragmented
packets. Statistics about original IPv4 flows include the 7-tuple information, source AS number,
destination AS number, VPN ID, TCP flag, and BGP next hop.

Sampling and Statistics Collection of IPv6 Flows

The NE5000E supports the sampling and statistics collection of original IPv6 flows, including
unicast and multicast packets, packets discarded by the uRPF/RPF check, and fragmented
packets. Statistics about original IPv6 flows include the 7-tuple information, source AS number,
destination AS number, VPN ID, TCP flag, and BGP next hop.

Sampling and Statistics Collection of MPLS Flows

The NE5000E supports the sampling and statistics collection of MPLS (Multi-Protocol Label
Switching) flows, including the third-layer label and IP header of MPLS packets.

Sampling Modes

The NE5000E supports the fixed packet sampling. The sampling mode and sampling ratio can
be configured in the system view, interface view, or ACL view.

l

Fixed packet sampling

In this mode, one packet is sampled every 

fix-packets-number

 packets. For example, if the

value specified by 

fix-packets-number

 is N, every Nth packet that passes through the

NetStream-enabled interface will be sampled.

HUAWEI NetEngine5000E Core Router
Configuration Guide - System Management

6 NetStream Configuration

Issue 01 (2011-10-15)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

127

Содержание NetEngine5000E












































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды