Huawei MU739 Скачать руководство пользователя страница 85

Страница: 85 / 89

HUAWEI MU739 HSPA+ LGA Module

Hardware Guide

Safety Information

Issue 01 (2011-08-24)

Huawei Proprietary and Confidential

8.14 Regulatory Information

The following approvals and notices apply in specific regions as noted.

8.14.1

CE Approval (European Union)

The wireless device is approved to be used in the member states of the EU. The

wireless device is in compliance with the essential requirements and other relevant

provisions of the Radio and Telecommunications Terminal Equipment Directive

1999/5/EC (R&TTE Directive).
Federal Communications Commission Notice (United States): Before a wireless

device model is available for sale to the public, it must be tested and certified to the

FCC that it does not exceed the limit established by the government-adopted

requirement for safe exposure.
The SAR limit adopted by the USA and Canada is 1.6 watts/kilogram (W/kg) averaged

over one gram of tissue. The highest SAR value reported to the FCC for this device

type was compliant with this limit.

8.14.2

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) this device may not cause harmful interference, and (2)

this device must accept any interference received, including interference that may

cause undesired operation.
The antenna(s) used for this transmitter must be installed to provide a separation

distance of at least 20 cm from all persons.

Warning:

Changes or modifications made to this equipment not expressly approved

by HUAWEI may void the FCC authorization to operate this equipment

draft2

Содержание MU739


























































































Результаты поиска

Содержание MU739

Отзывы:

Похожие инструкции для MU739

Бренды по названию

Популярные бренды

Huawei MU739, Руководство по оборудованию

Результаты поиска

Содержание MU739

Отзывы:

Похожие инструкции для MU739

Бренды по названию

Популярные бренды