Huawei MU739 Скачать руководство пользователя страница 77

Страница: 77 / 89

HUAWEI MU739 HSPA+ LGA Module

Hardware Guide

Certifications

Issue 01 (2011-08-24)

Huawei Proprietary and Confidential

The test system defined by the GCF requires thorough conformance tests of terminals.

The test system consists of indoor and outdoor tests.



Outdoor tests mean field testing of terminals in actual networks. Outdoor tests

are often performed in the networks of large European operators.



Indoor tests include protocol conformance testing and application conformance

testing.

−

Protocol conformance testing aims to test terminals

conformance with 3GPP

communication protocols, including GSM and WCDMA protocols.

−

Application conformance testing aims to test terminals

conformance with

widely used applications such as browsers, SUPL, MMS, and VT.

The OMA and the IMTC specify operation and interaction specifications of

such upper-layer applications. Application conformance testing is based on

the test standards defined by the OMA and the IMTC.

Terminals are not required to pass all the GCF tests. GCF tests are classified into the

following types:



Mandatory tests: Mandatory tests mean the tests that the terminals supporting

the GSM or WCDMA system must pass. Mandatory tests cover the capabilities

that a terminal must have when it supports communications in the relevant

system (GSM or WCDMA).



Optional tests: Optional tests refer to the tests that the terminals supporting a

feature specified in the 3GPP protocol or the OMA or IMTC protocols must pass.

If a manufacturer is unwilling to perform such tests for its terminals, the

manufacturer should declare that the terminals do not support the related

features and not claim that the terminals support the related features when

releasing the terminals to the market.



Unnecessary tests: The GCF does not require the terminals to pass all the tests

specified by the 3GPP, OMA, or IMTC. The tests that are not relevant need not to

be performed.

As the GCF test items need to be updated frequently to meet the requirements of new

communication technologies, the GCF updates the GCF-CC version continuously.

Usually the number of test items increases every time a new GCF-CC version is

released and terminals are required to pass an increasingly large number of tests.

The current GCF-CC version is 3.35. The GCF updates the GCF-CC version every

two or three months. The previous version is rendered obsolete 110 days after a new

version is released. All terminal manufacturers need to pay attention to the 110-day

rule because additional test items are required after the previous version becomes

obsolete. All GCF members can view the latest GCF-CC version, the currently

available version, and the validity period published on the GCF website.

7.5.2

PTCRB Certification

The PTCRB requirements are certification standards in North America.

The PTCRB was created in March 1997. GSM 850 MHz requirements were added to

the PTCRB requirements in May 2001, which is an important development milestone

in the history of standardization organizations in U.S.A. similar to the GCF, the PTCRB

comprises of operators and mainstream mobile phone manufacturers, and approved

laboratories. The PTCRB was created by North American operators (Cingular,

T-Mobile, and Rogers) and is applied to North America, Central America, and South

America. The PTCRB certification is similar to the GCF certification, except that the

draft2

Содержание MU739


























































































Результаты поиска

Содержание MU739

Отзывы:

Похожие инструкции для MU739

Бренды по названию

Популярные бренды

Huawei MU739, Руководство по оборудованию

Результаты поиска

Содержание MU739

Отзывы:

Похожие инструкции для MU739

Бренды по названию

Популярные бренды