Huawei MU739 Скачать руководство пользователя страница 64

Страница: 64 / 89

HUAWEI MU739 HSPA+ LGA Module

Hardware Guide

Certifications

Issue 01 (2011-08-24)

Huawei Proprietary and Confidential

The WEEE

Directive aims to reduce the amount of electrical and electronic equipment

being produced and to encourage everyone to reuse, recycle and recover it.

The rate of recovery reaches 75% by an average weight per product. The reuse and

recycling rate of components, materials, and substances reaches 65% by an average

weight per product (the additional 10% is for energy recovery). Huawei Technical

Support Department also declares the number and weight of the products delivered

every year on the European Recycling Platform.

According to the European Recycling Platform and the agreements concluded

between Huawei and the recycling companies in EU, the recycling companies

specified in the agreements are responsible for recycling the telecommunication

products.

7.3.3

PVC-free

PVC-free products are free of polyvinyl chloride

(

PVC) that is harmful to human

beings.

PVC is used to produce soft plastic products such as artificial leather, membrane, and

cable sheaths, and hard plastic products such as plates, windows, doors, pipes, and

valves.

PVC-free test mainly applies to printed circuit boards (PCBs) and surface mount

technology (SMT) components.

A notified body must perform PVC-free tests (qualitative analysis and mixed tests) and

then issue relevant test reports.

7.3.4

Packaging

The packaging and packaging waste of the product is compliant with 2004/12/EC.

7.4 National Compulsory Certification

7.4.1

Product Certification

Product certification is the process of certifying that a certain product complies with

the electromagnetic compatibility (EMC) safety and qualification requirements

stipulated in relevant international, national, or industrial regulations and issuing

relevant test report and certificate.

7.4.2

Importance of Product Certification

The possible violations of EMC rules are as follows:



Use certification mark without authorization.



Supply products without certification mark.



Supply incompatible products or apply certification mark to incompatible

products.



Make incorrect declarations or no compatibility record is created or kept.

Possible penalties for violation of EMC rules are as follows:

draft2

Содержание MU739


























































































Результаты поиска

Содержание MU739

Отзывы:

Похожие инструкции для MU739

Бренды по названию

Популярные бренды

Huawei MU739, Руководство по оборудованию

Результаты поиска

Содержание MU739

Отзывы:

Похожие инструкции для MU739

Бренды по названию

Популярные бренды