3
Installation
3.1 Preparation
Basic Requirement
l
All the electronic operation should be strictly compliance with the electrical safety
regulations, fire prevention regulations and other related regulations in your local region.
l
Check the package contents and make sure that the device in the package is in good
condition and all the assembly parts are included.
Checking Installing Environment
l
Be sure that there is enough space to install the speed dome and accessories.
l
Make sure that the wall is strong enough to withstand at least 8 times the weight of the
dome and the mount.
Preparing Cables
l
According to the actual network bandwidth, the Cat5 (in 100M) or Cat6(100M above) is
needed.
l
When the Positioning System uses standard 24V AC power supply, the power cable should
be American wire gauge 18 or above. The formula of the cross-section S (mm²) and the
maximum transmission distance L (m) of the bare wire is L=50*S.
Preparing Tools
Before installation, please prepare the tools needed, such as the expansion screws, electric
hammer, electric drill, wrench, screwdriver, electroprobe and network cable.
Original Packaging
When you unpack the dome, please keep the original package properly, in case of returning or
repairing the camera, you can pack the dome with the package.
NOTE
The user should be responsible for any damage caused when transporting with unoriginal package.
IPC6512-Z30&6522-Z30&6622-Z30
Installation Guide
3 Installation
Issue 02 (2014-12-25)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8
